Support → Assembly

Assembling RTA cabinets

Flat-stacked RediFrame cabinets go together with cam-and-screw joinery — one person, a Phillips screwdriver, and a few minutes per box. No clamps, no glue, no specialty tools.

The drawings

Every cabinet follows the same 12-part structure, and the full assembly drawings are here: RediFrame assembly drawings (PDF). The order confirmation email links the same document.

Tips from the shop floor

• Assemble on a flat, padded surface — the fronts are primed, not armored.
• Hang doors after the boxes are set; the soft-close hinges adjust in three directions for even reveals.
• Undermount slides click in and out — drawer boxes come back off without tools for finishing.
• Finish before you install: scuff the primer, topcoat, let it cure, then hang.

Stuck? Contact us — a real person who builds these will answer.